.. don't forget to set permissions hyperlink
  + commands links + guide links

.. _getting-started:

===============
Getting started
===============

If you recently installed Red, you should read this.
This is a quick start guide for a general usage.

.. note::

    If you haven't installed Red, please do it by following
    one of the `installation guides <install_guides/index>`.

Assuming you correctly installed Red, you should have a
window like this:

.. image:: .resources/red-console.png

.. _gettings-started-invite:

-------------------------
Invite Red to your server
-------------------------

When started, the console will show you the ``Invite URL``
(visible at the bottom of the screenshot above).
Paste the link into your browser and select the server you want
to invite the bot in, like any other bot.

.. note:: You need the ``Manage server`` permission to add bots.

Complete the captcha, it should tell you ``Authorized!`` and you
should see your bot in the members list.

.. attention::
    If Discord shows ``Bot requires code grant``, please untick this
    option in your token settings

    .. image:: .resources/code-grant.png

.. _getting-started-interact:

-----------------
Interact with Red
-----------------

As a chatbot, you interact with Red via the Discord text channels
(not from the command prompt). To send commands to the bot, you will have to
use the prefix you set before, followed by the command you want to use. For
example, if your prefix is ``!``, you will execute your command like this:
``!ping``.

.. note:: Since the prefix can be anything, it'll be referenced as ``[p]``
    in documentations.

.. _getting-started-commands:

~~~~~~~~~~~~
The commands
~~~~~~~~~~~~

The command you're going to use the most is **help**. This command will
show you **all of the available commands** of the bot with a small description.

.. code-block:: none

    [p]help

.. tip:: The message is generated dynamically and users will only see the
    commands they can use. You can change what commands users can use with the
    permissions cog.

You can also pick a command to get its detailed description and the
parameters.

.. code-block:: none

    [p]help command

.. note::
    Arguments enclosed in ``< >`` are **required** for the command to work.

    Arguments enclosed in ``[ ]`` are **optional** for the command;
    you can decide whether to use them or not.
    
    If your argument includes spaces like ``Hello world!``, most of the time
    you will need to place it in double quotes like this: ``"Hello world!"``.
    Sometimes (especially for the last argument) these double quotes are not
    required.

    Arguments followed by an ellipsis ``...`` means that you may provide
    multiple arguments for the command.

    For example, the command ``[p]cog install`` in the downloader cog has
    the syntax ``cog install <repo> <cogs...>``, meaning that you can provide
    1 or more ``cogs`` to install from the ``repo``.

    Arguments followed by ``=value`` means that, if not specified,
    the argument will be equal to ``value``.

    For example, the command ``[p]cleanup messages`` in the cleanup cog has
    the syntax ``cleanup messages <number> [delete_pinned=False]``, which means
    ``delete_pinned`` default will be false, unless you specify it as true.

You can use help to show the **categories** too, generally called cogs,
by doing the following (notice the capitalization):

.. code-block:: none

    [p]help YourCategory

Help also shows **command groups**. They are group of commands.
To get the description of a subcommand, type this:

.. code-block:: none

    [p]help commandgroup subcommand

When using subcommands, you also need to specify the command group.
As an example, ``cleanup`` has 6 subcommands. If you want
to use one of them, do: ``[p]cleanup messages 10``

.. _getting-started-cogs:

----
Cogs
----

Red is built with cogs, a fancy term for plugins. They are
modules that add functionality to Red. They contain
commands to use.

Red comes with 18 cogs containing the basic features, such
as moderation, utility, music, streams...

You can see your loaded and unloaded cogs with the ``[p]cogs``
command. By default, all cogs will be unloaded.

You can load or unload a cog by using the load or unload command

.. code-block:: none

    [p]load cogname
    [p]unload cogname

.. tip:: You can load and unload multiple cogs at once:

    .. code-block:: none

        [p]load cog1 cog2 ...

You can enable and disable everything you want, which means you can
customize Red how you want!

.. _getting-started-community-cogs:

~~~~~~~~~~~~~~
Community cogs
~~~~~~~~~~~~~~

There's an entire `community <https://discord.gg/red>`_ that contributes
to Red. Those contributors make additional cogs for you to use. You can
download them using the downloader cog.

You can start using the downloader cog by loading it: ``[p]load downloader``

You can find cogs by searching on `<https://index.discord.red>`_. Find whatever you want,
there are hundreds of cogs available!

.. note:: An even better way to discover new cogs and repositories is in the works! Stay tuned!

Cogs come in repositories. A repository is a container of cogs
that you can install. Let's suppose you want to install the ``say``
cog from the repository ``Laggrons-Dumb-Cogs``. You'll first need
to add the repository.

.. code-block:: none

    [p]repo add Laggrons-Dumb-Cogs https://github.com/retke/Laggrons-Dumb-Cogs

.. note:: You may need to specify a branch. If so, add its name after the link.

Then you can install the cog

.. code-block:: none

    [p]cog install Laggrons-Dumb-Cogs say

Now the cog is installed, but not loaded. You can load it using the ``[p]load``
command we talked about before.

.. _getting-started-permissions:

-----------
Permissions
-----------

Red works with different levels of permissions. Every cog defines
the level of permission needed for a command.

~~~~~~~~~
Bot owner
~~~~~~~~~

The bot owner can access all commands on every guild. They can also use
exclusive commands that can interact with the global settings
or system files.

*You* are the owner by default.

~~~~~~~~~~~~
Server owner
~~~~~~~~~~~~

The server owner can access all commands on his guild, except the global
ones or those that can interact with system files (available for the
bot owner).

~~~~~~~~~~~~~
Administrator
~~~~~~~~~~~~~

The administrator is defined by its roles. You can set multiple admin roles
with the ``[p]set roles addadminrole`` and ``[p]set roles removeadminrole`` commands.

For example, in the mod cog, an admin can use the ``[p]modset`` command
which defines the cog settings.

~~~~~~~~~
Moderator
~~~~~~~~~

A moderator is a step above the average users. You can set multiple moderator
roles with the ``[p]set roles addmodrole`` and ``[p]set roles removemodrole`` commands.

For example, in the filter cog, a mod will be able to use the various commands 
under ``[p]filter`` (such as adding and removing filtered words), but they will
not be able to modify the cog settings with the ``[p]filterset`` command.

.. tip::
    If you don't like the default permission settings for some commands or
    want to restrict a cog or a command to a channel/member, you can use
    the permissions cog.

.. _getting-started-hosting:

-------
Hosting
-------

If you are hosting Red on your personal computer, you will soon notice that
if you close the window or if you shut down you computer, Red will be offline.
It needs an environment to work and respond.

You can try to host Red somewhere it will always be online, like on a virtual
private server (VPS) or on a personal server (e.g. Raspberry Pi).

If you want to do it, follow these steps.

.. warning::
    Before trying to host Red on a Linux environment, you need to know the
    basics of the Unix commands, such as navigating the system files or use
    a terminal text editor.

    You should read `DigitalOcean's tutorial: An Introduction to Linux Basics
    <https://www.digitalocean.com/community/tutorials/an-introduction-to-linux-basics>`_
    if you have not used Linux before.

1. **Find a host**

  You need to find a server to host Red. You can rent a VPS (it can be free)
  on an online service. Please check :ref:`this list of hosts <host-list>` for
  more information.

  You can also buy a Raspberry Pi (~$20), which is a micro-computer that will
  be able to host Red. The model 3 or above is recommended.

2. **Install Linux**

  Most of the VPS providers have tools for installing Linux automatically. If
  you're a beginner, we recommend **Ubuntu 22.04 LTS**.

  For Raspberry Pi users, just install `Raspbian
  <https://www.raspberrypi.org/software/>`_ on a micro-SD card.

2.1. **Log in**

  .. note:: This section is for those who have an online server. If you have
    a local Linux machine, just open the terminal and skip to the next part.

  As we said before, a VPS is controlled through command line. You will have to
  connect to your VPS through a protocol called SSH.

  .. image:: .resources/instances-ssh-button.png

  On your host page (here, it is Google Cloud), find the SSH button and click on
  it. You will be connected to your server with command line. You should see
  something like this.

  .. image:: .resources/ssh-output.png

  .. note:: Don't forget to type the command ``logout`` to close the SSH properly.

3. **Install and set up Red**

  Follow one of the Linux installation guides. We provide guides for the
  most used distributions. Check the `list of install guides <install_guides/index>` and search for
  your distribution.

4. **Set up an auto-restart**

  Once you got Red running on your server, it will still shut down if you close
  the window. You can set up an auto-restarting system that will create a
  side task and handle fatal errors, so you can just leave your server running
  and enjoy Red!

  For that, follow :ref:`the systemd service guide <systemd-service-guide>`.

.. _getting-started-userdocs:

------------------
User documentation
------------------

You will soon start using the Red core cogs. A detailed documentation is
available for every core cog, under the :ref:`How to use <main>` section.

The cog guides are formatted the same. They're divided into 3 sections:

* **Guide**

  This will introduce you to the cog and explain you how it works.

* **Commands**

  A list of the available commands, with details and arguments.
  Each command guide will be formatted like this:

  * **Syntax**

    A line that will show how the command must be invoked, with the arguments.

  * **Aliases**
  
    Each command may have one or more aliases, which are alternative command names
    you can use to invoke the same command. For example, ``[p]set colour`` can also
    be invoked with ``[p]set color``. If there are aliases for a command, they will
    appear just under the syntax.

  * **Description**

    A detailed description of what the command does, with details about how
    it must be used.

  * **Arguments**

    A list of all arguments needed (or not) for the command, with more details.
