Contactors left that need programmed in #6

Open
opened 2025-11-07 17:35:51 -05:00 by sickprodigy · 2 comments
Owner

So this is just a list from another issue. This one is specifically for the contactors 1 pico will be able to control, once I code it in. (Or the options this project will take into account for) The order they are in is the order I will work on them in. Once I finish some other issues.

I calculate 6 contactors needed so far.

  • 1 heat
  • 1 cool
  • 1 Light switch
  • 1 dehu
  • 1 humidifier
  • 1 fan controller/fresh air
  • 1 fan controller/exhaust
So this is just a list from another issue. This one is specifically for the contactors 1 pico will be able to control, once I code it in. (Or the options this project will take into account for) The order they are in is the order I will work on them in. Once I finish some other issues. I calculate 6 contactors needed so far. - [x] 1 heat - [x] 1 cool - [ ] 1 Light switch - [ ] 1 dehu - [ ] 1 humidifier - [ ] 1 fan controller/fresh air - [ ] 1 fan controller/exhaust
sickprodigy added the enhancement label 2025-11-08 10:51:38 -05:00
Author
Owner

Not sure how #6 got thrown into those fixes was wondering where this went.

Not sure how #6 got thrown into those fixes was wondering where this went.
Author
Owner

https://www.amazon.com/dp/B09ZQRLD95/?coliid=IIKA64HBKSS6D&colid=1RMQCFAIZHGC7&psc=1&ref_=list_c_wl_lv_ov_lig_dp_it

ELEGOO 8 Channel DC 5V Relay Module with Optocoupler Compatible with Arduino UNO R3 MEGA 1280 DSP ARM PIC AVR STM32

8 channels would leave 1 extra relay to expand. May try to get one of this

and i did for like 5$ on aliexpress

https://www.amazon.com/dp/B09ZQRLD95/?coliid=IIKA64HBKSS6D&colid=1RMQCFAIZHGC7&psc=1&ref_=list_c_wl_lv_ov_lig_dp_it ELEGOO 8 Channel DC 5V Relay Module with Optocoupler Compatible with Arduino UNO R3 MEGA 1280 DSP ARM PIC AVR STM32 8 channels would leave 1 extra relay to expand. May try to get one of this and i did for like 5$ on aliexpress
Sign in to join this conversation.